auf Anfrage
je 1 ST
keine Verfügbarkeitsinformationen
Verpackungseinheiten
| 1 ST | Menge übernehmen |
Funktionen
Verkaufsdaten
| Mindestbestellmenge | 1 ST |
| Bestellschritt | 1 ST |
Beschreibung
This conductive conductivity sensor has a cell constant of K=0.01 (for measuring ranges 0.05 to 10 uS/cm or 0.1 to 20 MOhm/cm) and a Pt100 measuring insert in two-wire circuit. The installation is carried out via the process connection Clamp DN 25 made of stainless steel (1.4435). An M12 plug is available as electrical connection. The electrode material is stainless steel (1.4435). The installation length is 115 mm. The operating temperature is 0 to +135 °C and the maximum pressure load is 16 bar at 25 °C and 1 bar at 135 °C. This version is a so-called pharmaceutical version with acceptance test certificate n. EN 10204 3.1 for material and roughness, roughness of the parts in contact with the medium less than 0.8 my, with ASTM certificate and shrink-wrapped in foil.
Merkmale
| Verpackungseinheit | 1 |
| Gewicht | 0,36 |
| Gewichtseinheit | KG |
| Gewichtbezugsmenge | 1 |
| Ausführung | konduktiv |
| Max. Druck | 16 bar |
| Max. Temperatur | 135 °C |
| Ausführung des elektrischen Anschlusses | Rundstecker |
| Ausführung des Prozessanschlusses | sonstige |
| Zellenkonstante | 0,01 |
| Werkstoff der Elektrode | Edelstahl 316 (1.4435) |
| Sensortyp | Pt100 |
| Einstecklänge | 115 mm |
| Werkstoff des Prozessanschlusses | Edelstahl 316 (1.4435) |
| Kurzbeschreibung | Conductive 2-electrode conductivity sensor,0.05...10 uS/cm, 0.1...20 MOhm/cm |
| eClass 11.0 - Klasse | 27209090 |
| UNSPSC 14.0801 - Klasse | 41111900 |