auf Anfrage
je 1 ST
keine Verfügbarkeitsinformationen
Verpackungseinheiten
| 1 ST | Menge übernehmen |
Funktionen
Verkaufsdaten
| Mindestbestellmenge | 1 ST |
| Bestellschritt | 1 ST |
Beschreibung
This conductive conductivity sensor has a cell constant of K=0. 1 (for measuring ranges 0. 1 to 1000 uS/cm and a measuring insert Pt1000 in two-wires circuit. The installation takes place via the stainless steel (1. 4435) PEKA process connection adapter with EHEDG certification. An M12 connector is available as an electrical connection. The material of the electrode is stainless steel (1. 4435). The installation length is 40 mm. The operating temperature is 0 to +135°C in normal operation and up to +150°C for max. 45 min. during sterilization. The maximum pressure load is 9 bar at 25 °C and 15 bar at 150 °C (max. min. ) . This version is a so-called pharmaceutical version with acceptance test certificate n. EN 10 204 3. 1 for material and roughness, roughness of the parts in contact with the medium less than 0. 8 my, with ASTM certificate and welded in foil. ATTENTION: These measuring cells can only be used with an optional PEKA adapter.
Merkmale
| Verpackungseinheit | 1 |
| Gewicht | 0,38 |
| Gewichtseinheit | KG |
| Gewichtbezugsmenge | 1 |
| Ausführung | konduktiv |
| Max. Druck | 16 bar |
| Max. Temperatur | 135 °C |
| Ausführung des elektrischen Anschlusses | Rundstecker |
| Ausführung des Prozessanschlusses | Verschraubung PG 13,5 |
| Zellenkonstante | 0.1 |
| Werkstoff der Elektrode | Edelstahl 316 (1.4435) |
| Sensortyp | Pt1000 |
| Einstecklänge | 40 mm |
| Werkstoff des Prozessanschlusses | Edelstahl 316 (1.4435) |
| Kurzbeschreibung | Conductive 2-electrode conductivity sensor, 0. 1 to 1000 uS/cm,Pt1000,PEKA |
| eClass 11.0 - Klasse | 27209090 |
| UNSPSC 14.0801 - Klasse | 41111900 |